How to Fix a Draughty Window

A draughty window makes a room feel colder than the thermostat says and pushes up your heating bills. Before you assume you need new windows, it’s worth tracking down the draught — many are cheap and easy to fix in minutes. Here’s how.

Find the draught first

On a breezy day, run the back of a damp hand or a thin ribbon around the window and feel or watch for air movement. Common culprits are worn seals, gaps between the frame and the wall, failed sealant, and loose or dropped opening sashes. Pinpointing the source tells you whether it’s a two-minute fix or something bigger.

Quick, cheap fixes

  • Replace perished gaskets or weatherstrip: self-adhesive foam or brush strip renews the seal around an opening sash.
  • Re-seal the frame-to-wall gap: fresh exterior-grade sealant closes gaps where the frame meets the masonry.
  • Adjust hinges and keeps: on uPVC windows, adjusting the hinges and lock keeps can pull a sash tighter against its seal.
  • Check trickle vents: make sure they’re closed if you’re feeling a draught from them on a cold day.

When it’s the glazing or the window

If the draught comes from a failed sealed unit or the window is old, warped or beyond adjustment, replacement is the lasting answer. Old single glazing and tired frames rarely reward patching. Modern windows seal tightly with multi-point locking that compresses the sash evenly against the frame.

Draught-proofing older windows

For period timber windows you want to keep, specialist draught-proofing systems add discreet seals and brush strips that cut draughts dramatically without changing the look — a popular option in conservation areas where replacement isn’t allowed. Secondary glazing adds a further barrier.

Weigh it up

For a serviceable modern window, a few pounds of weatherstrip and ten minutes of adjustment often cures the draught. For old, failing windows, factor the cost of repeated patching against a replacement that also cuts noise, boosts security and raises your energy rating. Our guide to winter-proofing has a full seasonal checklist.

Don’t over-seal

Finally, remember that some background ventilation is healthy. Seal uncontrolled draughts, but keep trickle vents and extractor fans working so you don’t trade a draught for condensation and mould.

The tools and materials you’ll need

Most draught fixes need very little. A roll of self-adhesive weatherstrip or brush seal, a tube of exterior-grade frame sealant and a caulking gun, a Torx or Allen key for hinge and cam adjustments, and a silicone lubricant cover the vast majority of jobs — all inexpensive and available from any DIY shop. Clean the surfaces first so new seals stick, work on a dry day for sealant, and make hinge adjustments in small increments, testing as you go.

When a draught is actually something else

Not every “draught” is air leaking through the window. A cold radiant feeling near a large pane of old single glazing is heat loss through the glass itself, which weatherstrip won’t fix — only better glazing will. Similarly, condensation or a damp smell can be mistaken for a draught. Diagnose first: if you feel moving air, seal it; if you feel cold radiating from the glass, the answer is better glazing or a thermal curtain, not more sealant.

Related guides

Ready to get quotes? Find trusted local double glazing installers on our directory and compare them side by side — it’s free and there’s no obligation.

Sources & further reading

Get your business in front of homeowners

Add your double glazing business to the UK’s biggest fenestration directory — homeowners near you are searching for quotes right now.

Add your business
AdAdvertisement
Get free quotes